G.T.C. ITALIA srl 2, via Ponte Reale 16124 GENOVA Tel.: +39-0102 471 728 Fax: +39-0102 471 732 E-mail: gtc@gsi.it

ACTIVITY G.T.C. ITALIA makes part of an international group of companies specialised in the construction and sales of the most complete line of BALL VALVES. As a major supplier of ball valves, GTC ITALIA can provide the exact valves and actuators to meet the most severe application requirements. Keeping always in mind that the main scope of our activity is to give the most effective support to the customers, we co-operate with a selected number of reputable manufacturers. We are therefore in a position to supply the widest range of products for any industrial application: Gate, Globe & Check valves (low & high pressure) - Large size butterfly valves - FCC (Fuel Catalyst Cracking) valves - Seawater pumps - Fluorcarbon polymer coated and ceramic coated bolts & nuts - Gaskets & packings (from P.T.F.E. to the most sophisticated compounds). TRADING RANGE Floating Ball valves GENERAL PURPOSE - Split Body, Flanged ends, ASME 150 to 1500 lbs, 1/2” to 10”. HIGH AND LOW TEMPERATURE - Split Body, Flanged ends, ASME 150-300-600 lbs, 1/2” to 10”, From -50°C up to 500°C. - Split Body, SW-BW or screwed ends, ASME 300-600 lbs, 1/2” to 2”, From -50°C up to 500°C. - End Entry fully jacketed body, Flanged ends, ASME 150-300 lbs, 3/4” to 8”, Up to 500°C. - Split Body, Flanged ends, ASME 150-300 lbs, Up to -196°C. METAL SEATED - Split Body, Flanged ends, ASME 150-300-600 lbs, 1/2” to 8', From -50°C to 500°C, Class 5 Seat Leakage. THREE-WAY - Split Body or Top Entry, Flanged ends, ASME 150 to 600 lbs, 1/2” to 8”, From -30°C to 500°C Trunnion Ball valves GENERAL PURPOSE - Split Body, Flanged ends, ASME 150 to 2500 lbs, 1/2” to 36”. HIGH TEMPERATURE - Steel Metal seated valves METAL SEATED - Split Body, Flanged ends, ASME 150 to 900 lbs, 1/2” to 20”, From -50°C to 500°C, Class 5 Seat Leakage. - All welded Body for gas transmission and distribution, RF & BW ends, ASME 150 to 600 lbs, 4” to 60”. THREE-WAY - Split Body or Top Entry, Flanged ends, ASME 150 to 600 lbs, 1/2” to 12”, From -30°C to 500°C. Control Valves - Split Body or One-piece Body, Flanged ends, 1/2” to 8”, ANSI 150 to 600 lbs, From -30°C to 350°C, Class 4 & 5 Seat Leakage. Diaphragm valves - Two-pieces Body, Flanged ends, ASME 150 lbs, 1/2” to 6”. Pneumatic actuators - Double acting, Spring return, 3 to 7Kgf/cm2. SPECIAL OPTIONS FOR VALVES: Steam extension - Body coating - Double Block & Bleed. TESTINGS: Chlorine, Oxygen, Vacuum service - Helium test - Liquid penetrant - Magnetic particle - Ultra-sonic - X-ray. FOUNDED 1983 WORKFORCE 5/15 GOVERNING DIRECTOR Dr. Luciano de Angelis MAIN MARKET Middle East 40%, Far East and Asian Countries 20%, Europe 10%, domestic 30%.