|
SPECIALLY ENGINEERED
VALVES
APPRO VALS
ISO 9001, 14001, 18001, PED certifications – API 600, API 6A, API
6D monogram – GOST – GGTN.
ACTIVITY
Established in 1990, the activity was initially addressed to the assembly
and testing of valves for third parties. Then the company gradually switched
to its own production of high quality valves supported by engineering,
quality control and service.
PRODUCTION RANGE
Present main lines are valves according to:
• ASME B16.34,
B16.25, B16.10 rating from 150# to 4500#, cast and forged material,
Bolted Bonnet and Pressure Seal:
- Gate: Flex
and Split Wedge type, Parallel
Slide Disc type
- Globe:
standard design, angle and Y type;
- Check: Swing
and Tilting
Disc;
- Ball: Trunnion (split body side entry, fully welded, top entry, standard
or extended stem), Floating and Wafer.
Dimensions from 2” to 28”, larger sizes available on request.
• API 600,
rating from 150# to 2500#, cast and forged material, Bolted Bonnet:
- Gate: flex wedge, parallel slide, split wedge
Dimensions from 2” to 48”.
• API 6A,
rating from 2000# to 15000#, cast and forged material:
- Gate:
expanding and slab, full and reduced bore;
- Check Swing type
Dimensions from 1.13/16” to 7.1/16”, larger sizes available
on request
- Ball: Trunnion (split body side entry, welded body side entry, top entry,
standard or extended stem), Floating and Wafer.
Dimensions from 2” to 36”, larger sizes available on request
• API 6D,
rating from 150# to 2500#, cast and forged material:
- Gate
Through Conduit: expanding and slab, full and reduced bore;
- Check Swing type
- Ball: Trunnion (split body side entry, fully welded, top entry, standard
or extended stem), Floating and Wafer.
Dimensions from 2” to 36”, larger sizes available on request.
• Specially engineered
valves:
- Gate and Globe Bellows
seal
- Cryogenic.
Friulco associates products
and services supply with dedicated quality assurance system, trained and
certified welders and non-destructive testing operators. Extended expertise
of products and manufacturing is available from management team.
MAIN FACILITIES
Factory Area:
- Total area: 5.750 sqm.
- Covered area: 5.000 sqm.
Main Machinery:
- no. 2 CNC Machining Centre (2”-24” valve body size)
- no. 3 Grinding Machine
- no. 1 CNC Machining Centre (2”-8” valve body size)
- no. 2 Lapping Machine
- no. 3 Horizontal Lathes
- no. 2 Drilling Machine
- no. 1 Grinding Machine, large size
In addition to the above, Friulco release of an extensive network of sub-suppliers
for its machining and components preparation.
Lifting equipment:
- no. 1 Overhead Crane 10.0 ton
- no. 1 Overhead Crane 5.0 ton
- no. 1 Overhead Crane 4.0 ton
- no. 1 Mobile Crane 30.0 ton
Welding Equipments and Personnel
- ASME IX qualified welders and welding procedures
Materials
- Carbon & low alloy steel
- Austenitic stainless steel
- Ferritic and ferritic-austenitic stainless steel
- Nickel alloys
- Hard facing (stellite)
Methods
- Gas Metal Arch Welding (GMAW)
- Shielded Metal Arch Welding (SMAW)
- Gas Tungsten Arch Welding (GTAW)
Heat treatment capabilities
- Temperature calibration per API 6A requirements
- Heat treat cycle chart registration
- Max dimension: width 2,000 mm X Length 3,000 mm X Height 3, 000 mm
- Max temperature up to 1200 °C (2192 °F)
- Max Load 9,000 kg
CONTACTS
Mr. Franco Baisero
Mrs. Susanna Bregant
Mr. Fausto Forabosco
MAIN MARKET
Global
|
