COSTRUZIONI MECCANICHE LEGNANESI srl MASTERGEAR 5, via del Brugo 20025 LEGNANO (Milano) Tel.: +39-0331 548 847 Fax: +39-0331 592 800 E-mail: cml@cml-mastergear.it Web Site: www.mastergearworldwide.com

APPROVALS UNI EN ISO 9001:2000 by DNV certified ACTIVITY Firm of MASTERGEAR group´s, our society is a important manufacture of bevel gear actuators especially designed to operate valves and sluice gates, both in rising and non rising stem modes: Our bevel gears are the following specifications: - The pinion and gear are both lodged betwen pillow blocks thus allowing for maximum thrust. - A accurate design ensures maximum performance and durability. - By minimizing the number of patrs in the product, maintenance requirements have been held to a minimum. - The design is such that repairs of these bevel gear actuators is possible without removing them from the valves thus keepling them operational during maintenance periods by means of handwheels or levers. - When fitted with stem covers these actuators become fully weatherproof. - The actuators are fully lubricated with grease or, upon request, with oil. - The actuators can be fitted with hammerblow features to operate valves, whicc may be seized by lack of use. - Mounting patterns are in accordance with ISO 5210/11, MSS SP-102 or, upon request, special mounting patterns can be provided. - Bevel actuators can be fitted for motorization. PRODUCTION RANGE Bevel gear actuators for valves and sluice gates - for manual operations - with additional reduction spur drive, with one or two ratios - with right-angle input, down wards - with chainwheel - motor driven unit with automatic torque and position adjustement - with thrust block on valve CML-MASTERGEAR bevel actuators are manufactured in a variety of environmental specifications: Weatherproof, Subsea submersible, Marinized, Tropicalized, Buried service, Low and High temperature, etc.- Accessories for bevel gear actuators - Plates, Handwheels, Manual drives, Shafts, Columns, Sterns, Cover tubes, Position indicators, Padlock flanges, Portable powered drives. Worm gear actuators - quarter turn, manual - quarter turn, motorizable - quarter turn, declutchable - 360°, manual MANUFACTURING FACILITIES Covered area: 1700 sq.m ­ Uncovered area: 3500 sq.m ESTABLISHED 1951 WORKFORCE 32 CONTACT Mr. Felice Pastori MAIN MARKET Europe and USA